Bitdeer SealMiner A3 Hydro (500TH)

500 TH/s of SHA-256 hashrate at 6,750W continuous power draw and 13.5 J/TH efficiency. Bitdeer's ±5% hashrate tolerance produces real world output in the 460 to 540 TH/s range. ±10% power tolerance produces wall draw in the 6,210 to 7,290W range. Standard bin of the SealMiner A3 hydro tier, positioned below the A3 Pro Hydro 660TH flagship (12.5 J/TH) at meaningfully lower per unit acquisition cost.

Bin tier differentiation across identical chassis platform. A3 Hydro (this product): 500 TH/s at 6,750W and 13.5 J/TH (standard bin). A3 Pro Hydro: 660 TH/s at 8,250W and 12.5 J/TH (top bin). Both share identical 2U chassis, cooling architecture, power infrastructure requirements, and Bitdeer firmware. Top bin SEAL02 silicon runs at higher clock frequencies producing 32 percent more hashrate from identical chassis at 8 percent better efficiency. Acquisition premium for top bin typically runs $2,000 to $3,500 per unit. Economics favor top bin at commercial electricity rates above $0.08 per kWh on longer deployment horizons. Standard bin wins at industrial hosting rates below $0.04 per kWh through acquisition cost savings.

Ano, jednotky jsou fyzicky zaměnitelné ve stejném stojanu a chladicím okruhu. Stejné rozměry skříně 2U, stejné umístění vodních přípojek, stejné připojení k napájení a Ethernetu. Mnoho provozovatelů flotil nasazuje smíšené konfigurace boxů (obvykle 60 až 80 procent standardních boxů, 20 až 40 procent Pro boxů), aby vyvážili kapitálovou efektivitu a provozní náklady napříč nasazením. Firmware a management rozhraní Bitdeer zachází se oběma typy boxů stejně pro sledování flotily. Jedině cílová hashová rychlost a spotřeba energie na jednotku se liší.

External closed loop water cooling system with substantial thermal capacity. Each unit generates approximately 6.75 kW thermal load (23,031 BTU per hour). Coolant flow requirement at least 10.2 liters per minute at operating pressure at or below 3.5 bar per Crypto Miner Source product documentation. Compatible with pure water plus corrosion inhibitor or approved antifreeze. Circulation pumps sized for fleet flow rate, dry cooler or water to water heat exchanger rated for aggregate thermal load, inline particulate filtration, automated flow monitoring. Same infrastructure tier as the A3 Pro Hydro.

380 to 480V three phase industrial power with up to 20 amps maximum current draw. Broader voltage tolerance than typical competing ASIC hardware (most specify 380 to 415V). At 480V three phase: approximately 8 amps per phase continuous at 6,750W. At 380V: approximately 10 amps per phase continuous. Fits standard 16 amp three phase breakers at any voltage within range. The 480V support enables direct North American industrial service compatibility without step down transformers.

Bitdeer Technologies Holding Co trades on NASDAQ under ticker BTDR as a US publicly listed company with regulatory compliance, financial transparency, and long term product commitment distinct from typical Chinese ASIC manufacturers. Bitdeer operates vertical integration across chip design (SEAL02 silicon through TSMC partnership), hardware manufacturing (SealMiner series), and industrial Bitcoin mining operations at scale (7+ EH/s deployed per BTDR investor disclosures). Deploying SealMiner hardware in its own mining operations provides aligned incentives for hardware reliability and long term supportability distinct from hardware only manufacturers.

MillionMiner $0.08 per kWh onsite calculator: $16.92 daily revenue, $12.96 electricity, $3.96 daily net profit. D-Central at $0.07 per kWh: approximately $3.90 daily profit. LeedMiner November 2025 reference at $0.045 per kWh: $21.20 daily revenue, $7.29 electricity, $13.91 daily net profit, projected $417 monthly. Economic viability favors industrial hosting rates below $0.06 per kWh for reliably positive margins at current BTC network conditions. ROI at $0.04 per kWh hosting typically runs 12 to 18 months depending on BTC price scenarios.

No. The 380 to 480V three phase power requirement excludes residential electrical service in most regions. The 6.75 kW thermal load requires external water cooling infrastructure impractical for residential installation. The 20.5 kg weight and 665 mm depth require standard 19 inch server rack hardware. This is strictly industrial hardware for professional mining facilities and commercial data centers. For home deployment, Bitmain S21+ Hydro 395TH with universal 100 to 240V single phase voltage represents the residential hydro ceiling.

10 units per 42U rack produce 5 PH/s aggregate at 67.5 kW per rack. 100 kW industrial panel supports approximately 14 units producing 7 PH/s aggregate at standard bin efficiency. Compare alternatives. 12 A3 Pro Hydro units at 100 kW: 7.92 PH/s (13 percent more aggregate at Pro bin efficiency). Mixed bin deployment of 8 A3 Pro Hydro plus 4 A3 Hydro at 100 kW: 7.28 PH/s aggregate with reduced acquisition CapEx versus pure Pro bin.

Bitdeer factory warranty with terms varying by distributor channel. BT-Miners documents 6 month factory warranty on new units. MillionMiner routes warranty claims through direct Bitdeer channels. Warranty exclusions include damage from coolant quality neglect, leaks caused by improper fitting installation, physical damage during cooling loop maintenance, power surge damage from inadequate electrical protection, operation outside specified environmental ranges, and unauthorized firmware modifications. Document coolant testing schedule and maintenance records to protect warranty coverage.

Industrial deployment with three phase power and hydro cooling infrastructure. Step one: install dedicated 380 to 480V three phase electrical service. Step two: install and commission external hydro cooling loop with pumps, plumbing, coolant, dry cooler infrastructure, and flow monitoring (verify 10.2 L/min minimum flow and 3.5 bar maximum pressure). Step three: 2U rack mount the units in standard 19 inch server racks. Connect water fittings to manifold system with isolation valves. Verify zero leaks before energizing. Step four: connect three phase power cables and Ethernet. Step five: power on, allow coolant flow to stabilize, find miner IP through DHCP, open Bitdeer management interface, configure pool URL and Bitcoin wallet, verify hashrate reaches 460+ TH/s within 15 to 20 minutes.

Any SHA-256 proof of work cryptocurrency. Bitcoin (BTC) is the primary target. Other compatible coins include Bitcoin Cash (BCH), Bitcoin SV (BSV), Fractal Bitcoin (FB), Namecoin (NMC), DigiByte (DGB SHA-256 chain). Merged mining BTC alongside BCH and BSV through supporting pools (ViaBTC, F2Pool) adds marginal secondary revenue.

Standard hydro cooling maintenance. Weekly visual inspection of water fittings for leaks or corrosion. Monthly coolant quality testing (pH within spec, particulate levels minimal, corrosion inhibitor concentration). Every 12 to 24 months full coolant replacement depending on fluid chemistry and water quality. Quarterly pump and dry cooler inspection. Flow rate verification against 10.2 L/min minimum. Inline filter replacement when pressure differential exceeds specification. Hashboard failure rates on hydro units run meaningfully lower than air cooled equivalents.

Yes. MillionMiner operates managed hosting facilities with 380 to 480V three phase industrial power and hydro cooling infrastructure capable of supporting SealMiner A3 Hydro deployments. Hosted deployment eliminates facility infrastructure CapEx and leverages negotiated industrial electricity rates typically $0.04 to $0.06 per kWh. At these hosted rates, the A3 Hydro delivers $12 to $16 daily net profit per unit. Contact MillionMiner sales through the Get a Quote button for hosting pricing and deployment timelines.

Any Stratum compatible Bitcoin pool. Foundry USA leads by network hashrate share. F2Pool has the longest operational track record. AntPool remains popular despite Bitdeer branding. ViaBTC offers accumulation mode payouts. Bitdeer operates its own mining pool (Bitdeer Pool) with SealMiner hardware optimization, typically offering competitive pool fees through vertical integration. For fleet deployments above 7 PH/s (equivalent to 14+ units), direct negotiated agreements with major pools typically secure reduced fees.

Potentially yes. The standard bin runs SEAL02 chips at lower clock frequencies than the Pro bin, which reduces thermal stress and electrical stress per chip. Over multi year deployment horizons, lower chip frequencies may translate to longer chip lifespan and lower failure rates on hashboards. Some fleet operators specifically favor standard bin for deployments planned beyond 4 years for this reason, accepting the efficiency penalty in exchange for improved longevity. Real world failure rate comparisons between bins are difficult to quantify empirically because deployment conditions vary significantly across operations.

CapEx beyond miner acquisition: three phase electrical service installation ($5,000 to $20,000 per facility), hydro cooling infrastructure ($5,000 to $25,000 per rack), rack hardware ($1,500 to $4,000). Annual OpEx per unit at 6.75 kW continuous: electricity at $4,730 at $0.08 per kWh, $4,139 at $0.07 per kWh, $2,366 at $0.04 per kWh industrial hosting. Water glycol coolant maintenance ($100 to $200 annually per unit). 3 year TCO per unit at $0.07 per kWh self hosted: approximately $7,400 hardware plus $12,417 electricity plus $800 maintenance equals $20,617 total. 3 year gross revenue at $0.07 per kWh profitability: $6,500 to $10,000.

Comparable tier comparison across manufacturers. A3 Hydro 500TH (this product): 500 TH/s at 6,750W and 13.5 J/TH, SEAL02 chip, 2U rack mount, 380 to 480V three phase. S21 XP Hydro 473TH: 473 TH/s at 5,676W and 12 J/TH, Bitmain chip, compact standalone, 100 to 240V universal single phase. The S21 XP Hydro delivers better efficiency and deployment flexibility through universal voltage compatibility. The A3 Hydro wins on per unit hashrate (6 percent more), NASDAQ listed manufacturer credibility, and 2U rack format for dense deployments. Market pricing and deployment context determines specific fit.

Yes, MillionMiner ships with free DDP (Delivered Duty Paid) worldwide delivery. MillionMiner covers all customs clearance, import duties, and taxes for your delivery address. You receive the miner ready for deployment without additional customs costs or paperwork. DDP service is particularly valuable for first time buyers in jurisdictions with complex customs procedures or high import duty rates.

Within Bitdeer SealMiner family: A3 Pro Hydro 660TH for top bin flagship upgrade, A3 Pro Air 290TH for air cooled without hydro infrastructure, A2 Hydro 446TH for prior generation SEAL01 option, SealMiner DL1 Air for entry solo mining. Within Bitmain S23 generation: S23 Hydro 580TH for 9.5 J/TH flagship efficiency standalone, S23 Hyd 3U 1.16 PH/s for petahash 3U, S23 Air 318TH for air cooled, S23 Immersion 442TH for tank deployment. Within Bitmain S21 generation: S21 XP Hydro 473TH for universal voltage compact hydro, S21+ Hydro 395TH for lower tier universal voltage, S21 XP+ Hyd 500TH for premium S21 generation mid tier. For operators diversifying: Whatsminer M73S+ 540TH provides MicroBT rack mount alternative. Cross algorithm fleet diversification: Antminer KS7 for Kaspa, Antminer L11 for Litecoin and Dogecoin, IceRiver AE3 for Aleo. For modular long lifespan infrastructure: Proto Rig 819 TH/s. MillionMiner's ASIC hosting service accepts SealMiner A3 Hydro units at negotiated industrial electricity rates.