The NerdQAxe++ has quietly become one of the most searched home Bitcoin miners of 2026, and for good reason. It takes the same BM1370 ASIC silicon that powers Bitmain's industrial Antminer S21 Pro, multiplies it four times over on a single open-source board, and delivers 4.8 TH/s of real SHA-256 hashing at a wall draw most people can run off a spare desk outlet. It is small, it is close to silent, and it turns solo Bitcoin mining into something an ordinary person can plug in at home.
This guide walks through everything a buyer actually needs: the full specs, where the nerdqaxe++ sits in the wider NerdQAxe family, how it stacks up against the bitaxe gamma and the avalon nano 3s, the honest economics of running one, and the different ways to get it hashing. We sell and host these units, so we will also be straight about who the machine suits and who should look elsewhere. You can browse the full home Bitcoin miners range while you read.
This guide walks through everything a buyer actually needs: the full specs, where the nerdqaxe++ sits in the wider NerdQAxe family, how it stacks up against the bitaxe gamma and the avalon nano 3s, the honest economics of running one, and the different ways to get it hashing. We sell and host these units, so we will also be straight about who the machine suits and who should look elsewhere. You can browse the full home Bitcoin miners range while you read.
Quick answer:
The NerdQAxe++ is a 4.8 TH/s home Bitcoin solo miner built on four BM1370 ASIC chips, drawing about 72W at roughly 15 J/TH. It runs open-source AxeOS over Wi-Fi, mines the SHA-256 algorithm (Bitcoin), and stays near 40 dB. It is designed for solo and lottery-style mining and for learning, not guaranteed daily income. This is educational content, not financial advice.
What is the NerdQAxe++?
The NerdQAxe++ is a compact, open-source Bitcoin ASIC miner built for home and solo use. It descends from the same community lineage as the nerdminer display project and the single-chip nerdaxe boards, but where those earlier devices carried one small chip, the nerdqaxe++ carries four BM1370 chips working together. That is what lifts it to 4.8 TH/s while keeping the whole unit quiet enough to sit on a shelf. It runs AxeOS, the same open firmware family the Bitaxe community maintains, and connects over 2.4 GHz Wi-Fi through an ESP32-S3 controller.
Because it is open hardware, the nerdqaxe name covers a small family of boards rather than a single product, which is why search interest around nerdqaxe spans everything from the tiny solo mining starter boards up to eight-chip monsters. The double-plus naming simply signals the higher-hashrate, four-chip tier of that line.
Because it is open hardware, the nerdqaxe name covers a small family of boards rather than a single product, which is why search interest around nerdqaxe spans everything from the tiny solo mining starter boards up to eight-chip monsters. The double-plus naming simply signals the higher-hashrate, four-chip tier of that line.
Where does the NerdQAxe++ come from?
The design grew out of the open-source miners community that also produced the Bitaxe. Independent builders wanted more hashrate than a single BM1370 could deliver without giving up the plug-and-play, Wi-Fi, run-it-anywhere character of a home miner. The nerdqaxe bitcoin solo miner boards answered that by ganging multiple chips onto one PCB and sharing a single controller and cooling stack. The result keeps the hobbyist spirit while pushing the numbers closer to something a serious solo miner would take seriously.
What are the NerdQAxe++ specs?
Here are the core NerdQAxe++ specs at stock settings. These figures describe the standard air-cooled Rev 6.1 board; the liquid-cooled variant trades noise and heat headroom for a higher sustained overclock.
| Specification | NerdQAxe++ (4.8TH, Rev 6.1) |
|---|---|
| Hashrate | 4.8 TH/s (SHA-256) |
| Power draw | ~72 W at the wall |
| Efficiency | ~15 J/TH |
| ASIC chips | 4 x BM1370 (Antminer S21 Pro silicon) |
| Algorithm / coin | SHA-256 / Bitcoin (BTC) |
| Noise | ~40 dB (effectively quiet) |
| Connectivity | Wi-Fi 2.4 GHz via ESP32-S3, AxeOS web UI |
| Cooling | Air (liquid-cooled Hydro option available) |
Two numbers matter most here. The first is efficiency: at around 15 J/TH, the nerdqaxe++ matches the wall-level efficiency of industrial machines that cost fifty times as much, because it uses the exact same chip. The second is noise. At roughly 40 dB the machine is audible but easy to live with, which is the whole point of a home miner. You are not putting an S21 Pro in your office.
How much hashrate does the NerdQAxe++ have, and is that a lot?
The NerdQAxe++ produces 4.8 TH/s, which is a genuinely strong figure for a home device. For context, a single-chip board like the Bitaxe Gamma tops out near 1.2 TH/s, so the nerdqaxe++ miner delivers roughly four times the hashing power from one unit while staying in the same quiet, low-maintenance category. That extra hashrate does not make you competitive with a warehouse, but it does meaningfully shorten the odds on a solo block compared with the smallest boards.
It helps to be honest about scale. Bitcoin's total network hashrate is measured in hundreds of exahashes per second, so 4.8 TH/s is a rounding error against the whole network. What the number really buys you is a better ticket in the solo lottery and a real, running node-adjacent mining setup you fully control. If you want the mechanics of how those odds actually work, our dedicated breakdown covers the math in full.
It helps to be honest about scale. Bitcoin's total network hashrate is measured in hundreds of exahashes per second, so 4.8 TH/s is a rounding error against the whole network. What the number really buys you is a better ticket in the solo lottery and a real, running node-adjacent mining setup you fully control. If you want the mechanics of how those odds actually work, our dedicated breakdown covers the math in full.
What is the NerdQAxe family?
The nerdqaxe++ is one rung on a short ladder. The same open-source design scales from smaller, quieter boards up to an eight-chip flagship, and choosing well means matching the rung to your space, your electricity, and your noise tolerance.
What is the NerdQAxe++ Hydro?
The nerdqaxe++ hydro is the liquid-cooled version of the same four-chip board. Water cooling lets it hold higher clocks without the fan noise climbing, which appeals to anyone planning to overclock or run the unit in a living space. If you already know you want to push the hardware, the NerdQAxe++ Hydro is the variant to look at. The smaller nerdqaxe hydro boards apply the same idea at lower hashrates for people who prioritise silence above all.
What is the NerdOctaxe?
The nerdoctaxe sits at the top of the line with eight BM1370 chips and roughly double the hashrate of the nerdqaxe++. It draws proportionally more power and runs warmer, so it is better suited to a garage, basement, or hosted rack than a bedroom desk. Think of it as the choice for someone who has outgrown the four-chip board but still wants to stay inside the open-source home-miner world rather than jumping to industrial gear.
How does the NerdQAxe++ compare to other home miners?
Most buyers are not choosing the nerdqaxe++ in a vacuum. They are weighing it against the two other names that dominate the home Bitcoin miner conversation: the single-chip Bitaxe Gamma and Canaan's sealed Avalon Nano 3s. The table below lines them up on the specs that actually change the decision.
How does the NerdQAxe++ compare to the Bitaxe Gamma?
The Bitaxe Gamma is the reference single-chip home miner: about 1.2 TH/s at 18W, near-silent, and cheaper to buy. The nerdqaxe++ uses four of the same BM1370 chips, so it lands at roughly four times the hashrate and four times the power for similar per-terahash efficiency. The Gamma wins on price, noise, and pure simplicity. The nerdqaxe++ wins when you want materially better solo odds from a single unit without stepping up to industrial hardware. Neither is wrong; they answer different questions.
How does the NerdQAxe++ compare to the Avalon Nano 3s?
Canaan's Avalon Nano 3s pushes the highest raw hashrate of the three at around 6 TH/s, but it does so at roughly 140W, which puts its efficiency near 23 J/TH, well behind the BM1370 boards. It is a sealed, closed-firmware unit, so you trade the open AxeOS tuning and repairability of the nerdqaxe++ for a plug-and-forget appliance. If you value the highest hashrate in a tidy box, the Nano 3s is compelling. If you value efficiency, openness, and the ability to tune, the nerdqaxe++ is the stronger pick.
NerdQAxe++ vs NerdOctaxe: which should you pick?
Stay with the nerdqaxe++ if noise and desk-friendliness matter and 4.8 TH/s is enough. Step up to the nerdoctaxe only if you have somewhere it can breathe and you specifically want the extra hashrate. The eight-chip board is not better for everyone; it is simply more of everything, including heat and sound.
How much does the NerdQAxe++ cost in 2026?
The nerdqaxe++ sits in the entry-level home-miner price tier, far below industrial ASICs and well above a single-chip Bitaxe, which reflects the four-chip build. Prices move with chip supply and Bitcoin sentiment, so rather than quote a figure that will age badly, the sensible move is to check the live listing. Our NerdQAxe++ 4.8TH page shows current pricing with duties-paid delivery and warranty included, and you can compare it against the wider best Bitcoin miners shortlist if you are still deciding on a tier.
One planning note worth making early: with any home miner, the purchase price is rarely the number that decides the outcome. Electricity does. A quiet 72W board is cheap to run, but the coin you earn against that power is what determines whether the machine is a hobby, a lottery ticket, or something better.
One planning note worth making early: with any home miner, the purchase price is rarely the number that decides the outcome. Electricity does. A quiet 72W board is cheap to run, but the coin you earn against that power is what determines whether the machine is a hobby, a lottery ticket, or something better.
Ready to Start Mining?
Free worldwide DDP shipping. Professional hosting from $0.055/kWh.
Is the NerdQAxe++ profitable?
Honestly, at typical home electricity rates the nerdqaxe++ profitability picture is best understood as a lottery ticket rather than a paycheck. The 4.8 TH/s it contributes is tiny against the network, so the expected steady income is small. The real prize is the chance, however long, of solo-mining a full block, plus the value of running and understanding real mining hardware. Below roughly eight cents per kilowatt-hour the running cost is modest; above that, the power bill starts to outweigh routine earnings.
If you want to model it for your own tariff, run the numbers in our mining profit calculator before buying, and read our breakdown of the cost to mine one Bitcoin to see how a small home rig fits into the wider economics. Treat any single-day estimate as directional only; difficulty and price move constantly.
If you want to model it for your own tariff, run the numbers in our mining profit calculator before buying, and read our breakdown of the cost to mine one Bitcoin to see how a small home rig fits into the wider economics. Treat any single-day estimate as directional only; difficulty and price move constantly.
What are your real odds of finding a block with a NerdQAxe++?
The odds of a single nerdqaxe++ solving a block on its own are very long, on the order of many thousands of years of expected time at current difficulty, which is exactly why this style of mining is called lottery mining. People still win. Small home miners have hit real blocks worth hundreds of thousands of dollars, and every running unit holds a live, non-zero ticket. Our full Bitcoin lottery odds breakdown lays out the exact probabilities per machine so you can see where the nerdqaxe++ lands.You have two ways to actually mine with the unit, and the choice changes what winning looks like:
- Point it at a solo pool such as CKPool or a public solo pool. You keep the full block reward if your machine finds the block, but payouts are rare and all-or-nothing.
- Join a shared pool instead. You give up the lottery jackpot but receive small, steady payouts proportional to your hashrate, which suits people who want to see the machine tick over.
- Whichever you choose, set it up in the AxeOS web dashboard by entering the pool address, your Bitcoin payout address, and your worker name, then save and let it hash.
If you want a step-by-step walkthrough, our solo mining setup guide covers the whole process, and our Bitcoin mining pool comparison helps you pick where to point the hashrate.
Who is the NerdQAxe++ for, and who should skip it?
The nerdqaxe++ fits a specific buyer well and disappoints anyone expecting a passive income machine. It is a strong choice if you are:
- A home miner who wants meaningfully better solo odds than a single-chip board without the noise of industrial gear.
- A tinkerer who values open-source AxeOS, on-board tuning, and repairable hardware over a sealed appliance.
- Someone with electricity around eight cents per kilowatt-hour or lower, or access to hosting, who wants the unit running full time.
- A learner who wants to run a real SHA-256 miner and understand pools, difficulty, and payouts hands-on.
You should skip it if you expect guaranteed daily profit, if you pay high residential power rates and cannot host, or if bedroom-quiet silence is non-negotiable, in which case a single Bitaxe Gamma is the better fit. Matching the machine to the goal is the difference between a satisfying setup and a disappointed return.
Should you buy, host, or solo mine the NerdQAxe++ at home?
There are three sensible ways to run a nerdqaxe++, and the right one depends on your power price and how hands-on you want to be:
- Run it at home. Buy the unit, plug it into a spare outlet, connect Wi-Fi, and mine on your own terms. Best when your electricity is cheap and you want full control.
- Host it. Ship the machine to a facility that runs it on low industrial power rates with proper cooling and uptime, which neutralises the home-tariff problem entirely. Best when your home power is expensive or you lack space.
- Test before you commit. Try the hardware and our service first, then scale into buying or hosting once you have seen the numbers on your own account.
If home power is the sticking point, hosted mining moves the unit onto cheap industrial electricity, and our cloud mining plans offer a fully managed route with no hardware to maintain.
Prefer to try before you buy? Start with a free 24-hour test, then scale into buying or hosting once you have seen the numbers on your own account.
Prefer to try before you buy? Start with a free 24-hour test, then scale into buying or hosting once you have seen the numbers on your own account.
How MillionMiner fits your NerdQAxe++ setup
MillionMiner sells the NerdQAxe++ 4.8TH and the liquid-cooled Hydro variant with duties-paid worldwide delivery and warranty, so the unit arrives ready to run with no customs surprises. If home electricity does not work in your favour, we can host the same hardware on industrial power, and if you would rather validate the idea first, a free 24-hour test lets you watch a real machine work before you spend anything.
For buyers weighing the whole shelf, our ASIC miner range and the most profitable ASIC miners guide put the nerdqaxe++ in context against everything from lottery boards to industrial machines.
For buyers weighing the whole shelf, our ASIC miner range and the most profitable ASIC miners guide put the nerdqaxe++ in context against everything from lottery boards to industrial machines.
The bottom line
The NerdQAxe++ is the balanced pick in the home Bitcoin miner field. It delivers four times a single board's hashrate at industrial-grade efficiency, stays quiet enough to live with, and keeps the open-source flexibility that makes these machines fun to run. It will not pay a salary at home electricity rates, but as a low-power solo Bitcoin miner, a serious lottery ticket, and a hands-on way to hold real hashrate, it earns its place. Match it to cheap power or hosting, point it at the pool that fits your goal, and it becomes one of the most rewarding small machines in Bitcoin.
Frequently asked questions
Is the NerdQAxe++ profitable?
At home electricity rates it earns little in steady income and is best treated as a lottery-style solo miner. Below roughly eight cents per kilowatt-hour, or on hosted industrial power, the running cost is modest and the real value is the solo block chance plus learning. Model your own tariff before buying.
What coin does the NerdQAxe++ mine?
It mines Bitcoin and other SHA-256 coins. The four BM1370 chips are SHA-256 ASICs, so the machine cannot mine algorithms like Scrypt or Kaspa; it is a dedicated Bitcoin solo miner.
How loud is the NerdQAxe++?
Around 40 dB at stock settings, which is audible but easy to live with in a home. It is far quieter than any industrial ASIC, though not as silent as a single-chip Bitaxe. The Hydro version runs quieter under overclock.
What chip is in the NerdQAxe++?
Four BM1370 ASIC chips, the same silicon Bitmain uses in the industrial Antminer S21 Pro. That shared chip is why a home board can hit roughly 15 J/TH efficiency.
Is the NerdQAxe++ better than the Bitaxe Gamma?
It depends on your goal. The nerdqaxe++ offers about four times the hashrate from one unit at similar efficiency, so it gives better solo odds. The Bitaxe Gamma is cheaper, quieter, and simpler. Pick the nerdqaxe++ for hashrate, the Gamma for price and silence.
Can the NerdQAxe++ mine solo?
Yes. It is designed for solo and lottery mining. You point it at a solo pool such as CKPool or a public solo pool through the AxeOS dashboard, and if your machine solves a block you keep the full reward.
How much power does the NerdQAxe++ use?
Its power consumption is about 72W at the wall at stock settings, giving roughly 15 J/TH efficiency. That is low enough to run from an ordinary outlet, which is a large part of the appeal for home mining.
What is the difference between the NerdQAxe++ and the NerdQAxe++ Hydro?
Both use the same four-chip, 4.8 TH/s design. The Hydro adds liquid cooling, which holds higher clocks with less noise and better thermal headroom for overclocking, at the cost of a more involved setup.
Is the NerdQAxe++ good for beginners?
Yes, with realistic expectations. Setup is plug-in, connect Wi-Fi, and configure a pool in the browser, so it is beginner-friendly. Just treat it as a learning and lottery device rather than a guaranteed earner.
Where can I buy a NerdQAxe++?
MillionMiner stocks the NerdQAxe++ 4.8TH and the Hydro variant with duties-paid delivery and warranty. You can also host it on industrial power or start with a free 24-hour test to see it run first.
