Fluminer L1 Pro (6GH)

6 GH/s Scrypt at 1,400W continuous and 0.233 J/MH (233 J/GH) efficiency. ±5 percent hashrate tolerance produces real world output between 5.7 and 6.3 GH/s. The mid range home tier in Fluminer's quiet Scrypt lineup, between the L1 (5.3 GH/s at 40 dB) and L3 (9.5 GH/s at 45 dB).

Yes. The L1 Pro includes built in WiFi alongside standard Ethernet (10/100/1000M gigabit). WiFi allows placement anywhere with a power outlet and wireless network signal, removing the Ethernet cable run requirement that limits placement of nearly every competing ASIC miner. Configure WiFi through the Fluminer web interface on first boot using Ethernet or direct connection, then disconnect Ethernet for WiFi only operation if preferred.

45 dB near silent operation, roughly equivalent to a quiet conversation. For comparison, every industrial Scrypt miner at 6 GH/s or above (Bitmain L9, L11 family, VolcMiner D3, ElphaPex DG2+, Bitdeer SEALMINER DL1 Air) runs at 70 to 75 dB. The L1 Pro's 45 dB represents roughly 85 percent less perceived loudness, making it deployable in home environments without hearing protection or sound isolation infrastructure.

Yes. Three specifications make the L1 Pro genuinely home deployable. Voltage: universal 110 to 240V runs on any standard residential outlet worldwide (1,400W draws only 12.7 amps at 110V, fitting standard 15 to 20 amp residential circuits). Noise: 45 dB sits below typical conversation levels and does not require dedicated mining space. Form factor: 140 x 300 x 450 mm slim 3U server chassis at 12.8 kg looks like a small tower PC and blends into home offices, living rooms, or utility spaces.

0.233 J/MH (233 J/GH) at 6 GH/s and 1,400W continuous. Lower efficiency per megahash than industrial Scrypt miners (Bitmain L11 Pro at 172 J/GH, VolcMiner D3 at 179 J/GH, Bitdeer SEALMINER DL1 Air at 149 J/GH). The efficiency gap is the cost of quiet, residential deployable design. The L1 Pro's value proposition is deployment flexibility (where and how the miner can run) rather than per megahash efficiency leadership.

The L1 Pro is meaningfully larger than typical "box miners" in the entry tier. ElphaPex DG Home 1 (2.1 GH/s at 630W), VolcMiner D1 Mini (2.2 GH/s at 500W), and similar box format miners fit on a desktop in compact form factors but produce lower hashrate at lower efficiency. The L1 Pro at 6 GH/s delivers approximately 3 times the hashrate of box miners while still occupying a small tower PC sized chassis suitable for home placement. For operators wanting more hashrate than entry tier box miners without scaling to industrial hardware, the L1 Pro fills the mid range home Scrypt tier.

Yes. Box contents: Fluminer L1 Pro unit, PSU sized for the 1,400W rated load with C13 power connector, power cables, and quick start guide. Contents may vary by batch, exact items confirmed in order confirmation.

6 month Fluminer factory warranty on new units covering manufacturing defects and hardware failures under normal operation within specified environmental ranges. Warranty exclusions include damage from operation outside environmental specifications, power surge damage, physical damage, and unauthorized firmware modifications. MillionMiner routes warranty claims through Fluminer manufacturer channels.

Yes. Ships from MillionMiner with free DDP (Delivered Duty Paid) worldwide delivery covering all customs clearance, import duties, and taxes. The miner arrives at the deployment address ready to operate without additional customs costs or paperwork.

L3 at 9.5 GH/s, 1,700W, 45 dB. L1 Pro at 6 GH/s, 1,400W, 45 dB. The L3 delivers approximately 58 percent more hashrate at approximately 21 percent more power draw, both at the same 45 dB quiet operation and WiFi connectivity. Same chassis dimensions (140 x 300 x 450 mm). Same triple fan air cooling architecture. The L3 represents the larger home tier flagship. The L1 Pro represents the mid range home tier at lower capital cost and lower power draw, suitable for operators starting smaller or with lower available residential circuit capacity.

L9 at 17 GH/s, 3,570W, 0.21 J/MH, and 75 dB. L1 Pro at 6 GH/s, 1,400W, 0.233 J/MH, and 45 dB. The L9 delivers approximately 183 percent more hashrate at approximately 155 percent more power draw with industrial 75 dB noise. The L1 Pro delivers 30 dB quieter operation, universal 110V residential voltage compatibility, WiFi connectivity, and small tower PC form factor at residential deployable scale. The L9 targets dedicated mining facilities. The L1 Pro targets home miners where deployment flexibility outweighs raw hashrate per unit.

DG Home 1 at 2.1 GH/s, 630W, with 0.3 J/MH efficiency. L1 Pro at 6 GH/s, 1,400W, 0.233 J/MH. The L1 Pro delivers approximately 186 percent more hashrate at approximately 122 percent more power draw with approximately 22 percent better efficiency per megahash. Both target home Scrypt deployment with universal voltage compatibility. The DG Home 1 sits as the entry tier home Scrypt option. The L1 Pro sits as the mid range home Scrypt option for operators wanting more hashrate than entry tier without scaling to industrial hardware.

All Scrypt algorithm cryptocurrencies through merged mining. Primary coins: Litecoin (LTC), Dogecoin (DOGE), Bellscoin (BELLS). Additional Scrypt coins: Luckycoin (LKY), Junkcoin (JKC), Pepecoin (PEP) through pools that support those chains. Combined merged mining revenue typically runs 20 to 40 percent above solo LTC at the same hashrate.

Universal 110 to 240V single phase input. At 1,400W the unit draws only approximately 12.7 amps at 110V, fitting within standard 15 to 20 amp North American residential circuits without dedicated infrastructure. At 220V approximately 6.4 amps. Note: MillionMiner's product page currently lists 220V only, but Fluminer documentation, Amazon listings, EndlessMining, BT-Miners, and CryptoMinerBros all confirm 110 to 240V universal compatibility, which is one of the L1 Pro's key home deployment advantages.

5 to 40 degrees Celsius at 5 to 95 percent humidity per MillionMiner specification. Some sources list 0 to 40 degrees Celsius. For hot climate deployments (UAE, Texas summer, Arizona, tropical regions), ambient cooling must hold intake air below 35 degrees Celsius under peak load for stable hashrate since the quiet cooling design has less thermal headroom than industrial fan configurations.

Four step setup. Connect PSU to miner using included C13 power cable, plug PSU into any 110 to 240V outlet (standard residential circuits work). Connect Ethernet cable to router OR configure WiFi through initial setup interface. Find miner IP via router admin or IP scanner tool. Open Fluminer web interface in browser, configure Scrypt merged mining pool URL and LTC/DOGE/BELLS wallet addresses, change default credentials. Verify hashrate reaches 5.7+ GH/s within 10 minutes. Total setup time typically 15 to 20 minutes for first time miners.

Major Scrypt merged mining pools accept L1 Pro hashrate including F2Pool, Poolin, ViaBTC, Prohashing, Litecoinpool. Pool fees typically 0.5 to 2 percent. Verify Bellscoin support before deployment since not all Scrypt pools have added BELLS. Solo mining at 6 GH/s against current Litecoin network difficulty produces extremely infrequent block finds, so pool mining is strongly recommended for revenue stability.

Profitability depends heavily on electricity cost and LTC/DOGE market prices. At residential electricity rates ($0.07 to $0.10 per kWh), the L1 Pro typically generates marginal positive returns or break even depending on conditions. The 0.233 J/MH efficiency is below industrial generation alternatives, and 6 GH/s hashrate produces lower absolute revenue than larger units. The L1 Pro's value proposition is not raw profitability optimization. It is the ability to mine Scrypt with meaningful hashrate from home without dedicated mining infrastructure, supplementing other crypto exposure or generating modest passive returns from underutilized residential electricity capacity.

Depends on deployment scenario and goals. Pro factors for home and small operators: 45 dB quiet operation enables residential deployment impossible with industrial Scrypt miners, WiFi connectivity removes Ethernet cable constraint, universal 110 to 240V runs on any standard residential outlet, slim 3U tower form factor blends into home environments, merged mining revenue across LTC/DOGE/BELLS, lower capital cost than the L3. Con factors: 0.233 J/MH efficiency below industrial hardware tier, 6 GH/s significantly less hashrate per unit than industrial alternatives (21 to 25 GH/s on L11 Pro or DL1 Air), Fluminer is newer manufacturer with less established ecosystem, third party firmware support limited. For dedicated facility operators chasing maximum economics, industrial alternatives deliver better per capital returns. For home operators valuing deployment flexibility, dual income from mining plus reduced heating cost in cold months, or testing Scrypt mining with manageable capital commitment, the L1 Pro fits the use case.

Within Fluminer's quiet home tier: Fluminer L3 (9.5 GH/s, 1,700W, 45 dB) for higher hashrate at the same chassis tier and noise level. For Bitcoin mining on similar home friendly infrastructure: Fluminer T3 (110 to 115 TH/s) covers quiet home Bitcoin mining. For industrial scale Scrypt mining at higher hashrate per unit: Bitmain L11 Pro (21 GH/s, 172 J/GH), VolcMiner D3 (20 GH/s, 179 J/GH), ElphaPex DG2+ (20.5 GH/s, 190 J/GH), Bitdeer SEALMINER DL1 Air (25 GH/s, 149 J/GH), all at 75 dB requiring dedicated mining space. For hydro Scrypt deployment: Bitmain L11 HU6 (33 GH/s) or L11 Hyd 2U (35 GH/s). For algorithm diversification at home tier: Antminer KS7 (45 TH/s) for Kaspa, Bitaxe Gamma series for quiet home Bitcoin. MillionMiner's ASIC hosting service covers turnkey Fluminer L1 Pro deployment, though hosting economics typically favor higher hashrate industrial hardware.