$/kWh
Bitmain
Model: Antminer Hydro Power Cable
Buy the Antminer Hydro Power Cable, a heavy-gauge 1.5-meter AC power cord built for Bitmain's water-cooled miners. Its 4-core wiring carries the high three-phase load that hydro rigs draw, connecting the APW11 or 7kW… hydro power supply to your breaker or hydro PDU. Rated for demanding continuous use, and shipped worldwide DDP from MillionMiner.
Genuine
Tested hardware
Worldwide
Global shipping
Support
Mining experts
Buy the Antminer Hydro Power Cable, a heavy-gauge 1.5-meter AC power cord built for Bitmain's water-cooled miners. Its 4-core wiring carries the high three-phase load that hydro rigs draw, connecting the APW11 or 7kW… hydro power supply to your breaker or hydro PDU. Rated for demanding continuous use, and shipped worldwide DDP from MillionMiner.
Free quote, reply in 24h. No sales call.
4.7 / 5 on Trustpilot
Verified customer reviews
30,000+ miners delivered
Shipped worldwide since 2020
1,200+ customers globally
Trusted in 50+ countries
Pricing, lead time, and hosting options. Personal advice from our sales team.
Pricing, lead time, and hosting options. Personal advice from our sales team.
Free quote, reply in 24h. No sales call.
4.7 / 5 on Trustpilot
Verified customer reviews
30,000+ miners delivered
Shipped worldwide since 2020
1,200+ customers globally
Trusted in 50+ countries
The Antminer Hydro Power Cable is the AC power cord you use to wire a Bitmain water-cooled miner correctly and safely. It matters more than it looks, because a hydro miner is a high-power machine: where an air-cooled Antminer might draw around 3,500W, a water-cooled unit commonly pulls 5,000 to 6,000W or more, and a cord sized for an air miner will run hot under that load. This cable is built for it, using heavy 4-core wiring at 2.5mm2 rated 20A at 500V, in a 1.5-meter length of the ANTWIRE LP-20 type, with heat-resistant insulation for continuous industrial duty. The wiring layout reflects the three-phase power that hydro miners run on: three live conductors, marked 1, 2 and 3, plus a… ground wire. One end connects directly to the hydro power supply, either the Antminer APW11 or the 7kW water-cooling PSU used on the current hydro machines. The other end comes in two configurations, and choosing the right one is why you tell us your setup when ordering: a version with bare cold-crimping terminals, which you wire into a breaker or air switch, and a version with an SA2-30 plug, which connects to a hydro miner PDU. The cable fits Bitmain's S19 and S21 hydro families, including the S19 Hyd, S19 XP Hyd, S19 Pro Hyd, S19 Pro+ Hyd, S19e XP Hyd, T19 Hydro, S21 Hydro, S21+ Hydro, S21 XP Hydro, S21e Hydro and S21e XP Hydro. Because hydro power systems have changed across generations, and the newest batches running Bitmain's P33 connector with the PW12V1 PDU take a different dedicated cable, confirm your exact miner model and power supply with us before ordering so you receive the correct cable and end configuration, and if you run S23 hydro hardware, check compatibility with our team first. One safety point applies to every hydro install: never connect or disconnect the power cord while the system is live, and always switch the PDU off first. Every Antminer Hydro Power Cable ships worldwide DDP from MillionMiner, so the checkout price is the final landed cost with customs and duties handled, and our team can confirm the right cable for the exact miners you run.
The Antminer Hydro Power Cable is the dedicated AC cord for Bitmain's water-cooled miners, and it exists because hydro rigs draw more power than a standard air-miner cable can safely carry. Water-cooled Antminers commonly pull 5,000 to 6,000W and above, so this cord uses heavy 4-core wiring at 2.5mm2, rated 20A and 500V, to move that load without the cable running hot. It is a 1.5-meter cord of the ANTWIRE LP-20 type. One end connects directly to the hydro power supply, the Antminer APW11 or the 7kW water-cooling PSU, and the other end comes… in two configurations depending on your setup: bare crimp terminals to wire into a breaker or air switch, or an SA2-30 plug to connect a hydro miner PDU. Either way it carries three live conductors marked 1, 2 and 3 plus a ground wire, for three-phase power. It fits the S19 and S21 hydro line, including the S19 Hyd, S19 XP Hyd, S19 Pro Hyd, S19 Pro+ Hyd, T19 Hydro, S21 Hydro, S21+ Hydro, S21 XP Hydro, S21e Hydro and S21e XP Hydro. One check saves a wrong order: the newest hydro batches running Bitmain's P33 power system with the PW12V1 PDU take a different dedicated cable, so confirm whether your machine uses the APW11 or 7kW hydro PSU. For safety, always power the PDU off before connecting or disconnecting a miner. Tell us your miner model, power supply, the connector end you need and your region when ordering. Ships worldwide DDP from MillionMiner, so the price at checkout is the final landed cost.
Our mining specialists can help you find the perfect miner for your setup and budget.
The Antminer Hydro Power Cable is a 1.5-meter AC power cord designed for Bitmain's water-cooled Antminer miners, the machines that draw far more current than an air-cooled rig. It uses heavy 4-core wiring (2.5mm2) rated 20A at 500V, which is what a hydro miner pulling 5,000 to 6,000W or more needs for stable, safe operation. One end connects to the hydro power supply, the APW11 or the 7kW water-cooling PSU, and the other terminates for your breaker or a hydro PDU, carrying three live conductors plus ground for three-phase power. It is… compatible with the S19 and S21 hydro families, including the S19 Hyd, S19 XP Hyd, S19 Pro Hyd, S21 Hydro, S21 XP Hydro and S21e XP Hydro, among others. Confirm your miner model, power supply and the connector end you need when ordering. Ships worldwide DDP from MillionMiner, so the checkout price is the final landed cost.
4-core 2.5mm2 wiring rated 20A at 500V, sized for water-cooled Antminers pulling 5,000 to 6,000W and up, where an air-miner cord would run hot.
Connects the APW11 or the 7kW water-cooling power supply to your breaker or hydro PDU, carrying three live conductors plus ground for three-phase power.
Compatible with S19 Hyd, S19 XP Hyd, S21 Hydro, S21 XP Hydro, S21e XP Hydro and more. Confirm your model and connector end when ordering.
The Antminer Hydro Power Cable is for Bitmain's water-cooled miners running the APW11 or 7kW hydro power supply, including the S19 and S21 hydro families such as the S19 Hyd, S19 XP Hyd, S19 Pro Hyd, T19 Hydro, S21 Hydro, S21 XP Hydro and S21e XP Hydro. Confirm your exact model and power supply with us before ordering, since the newest batches on Bitmain's P33 and PW12V1 power system use a different dedicated cable.
The Antminer Hydro Power Cable uses 4-core wiring at 2.5mm2, rated 20A at 500V, in a 1.5-meter length with heat-resistant insulation for continuous industrial use. That heavier gauge is what lets it carry a hydro miner's high current safely.
Hydro miners need a heavier cable because water-cooled machines draw much more power, commonly 5,000 to 6,000W and above, and they run on three-phase power. A cord sized for a 3,500W air miner would run hot under that load, so the hydro cable uses heavier 4-core wiring built for the higher current.
The cable's PSU end connects to the APW11 or 7kW hydro PSU. The other end comes in two versions: bare cold-crimping terminals to wire into a breaker or air switch, or an SA2-30 plug to connect a hydro miner PDU. Tell us which you need when ordering.
No. An air-miner cord is not rated for a hydro miner's higher power and three-phase wiring, and using one risks overheating. Always use the correct hydro power cable for safe, stable operation.
Always switch the PDU off before connecting or disconnecting the cable, and never plug or unplug it while the system is live. Match the three live conductors and the ground wire correctly, and if you are wiring into a breaker, have a qualified electrician confirm the installation.
Every Antminer Hydro Power Cable ships worldwide DDP from MillionMiner, so the price at checkout is the final landed cost with customs, duties and freight handled and nothing to pay on arrival.
