Bitmain Antrack V1 Hydro-Cooling Mining Rack 24kW

The Bitmain Antrack V1 is the infrastructure product that makes hydro cooled Bitcoin mining accessible without a mechanical engineering project. Most hydro mining deployments require operators to source pumps, heat exchangers, manifolds, hoses, fittings, PDUs, and cooling fans from multiple vendors and assemble a custom cooling loop. The Antrack V1 ships with every component integrated into a single rack. Bitmain built the water pump, plate heat exchanger, eight cooling fans, PDU power distribution unit, all hoses, and all cabling into a 600 x 2000 x 1000 mm cabinet weighing 300 kg. Four rack slots accept any Antminer Hydro model: the S19 Hyd, S21 Hyd, or S23 Hyd series. Deployment is… genuinely straightforward for a piece of industrial equipment. Slide four Hydro miners into the rack slots. Each slot provides one pre-routed network cable and one pre-routed power cable. Connect the rack to 380 to 415V three phase power at up to 80 amps. Connect Ethernet. The internal pump begins circulating coolant through the plate heat exchanger, the eight fans dissipate heat, and the miners start hashing. No external radiator, no custom plumbing, no leak testing a DIY system. The waste heat recovery capability transforms mining economics. At 24 kW maximum load, the Antrack V1 outputs roughly 82,000 BTU per hour of thermal energy. That heat is recovery ready through the integrated heat exchanger. Practical applications already running in the field include underfloor heating for residential and commercial buildings covering up to 450 square meters, aquaculture temperature maintenance (a documented Japanese deployment replaced $104 per day in electric heating for abalone farming), greenhouse heating during cold months, and industrial process heating where low grade thermal energy has value. Water flow rate runs 32 to 40 liters per minute across the four miner slots. Water conductivity must remain below 100 microseconds per centimeter; the system ships with conductivity below 20. Ambient temperature range is 15 to 45 degrees Celsius with minimum 1 meter clearance front and rear for airflow. When running older models (S19 Hyd, T19 Hyd, S19 Pro Hyd), keep ambient below 35 degrees. Newer S21 and S23 Hydro units tolerate the full 45 degree range. Compatibility spans the full Bitmain Hydro lineup. Four S21 XP Hydro units at 473 TH/s each produce 1,892 TH/s (nearly 1.9 PH/s) from a single Antrack V1 at approximately 22.7 kW. Four S23 Hyd units at 580 TH/s each produce 2,320 TH/s (2.32 PH/s) at the full 24 kW load. Mix and match generations within the same rack based on available inventory and budget. MillionMiner ships the Antrack V1 brand new with 1 year replacement parts warranty and free DDP delivery worldwide. Contact MillionMiner sales for current pricing, bulk configurations, and hosting site integration planning.